For iPhone,iPadand iPod touch are present on the market a lot of Accessories created by various manufacturers from all over the world. Most of the time, depending on price We have part and another quality standard, which translates by compatibility (data cables, Chargers, headphones – headset), protection (in case transparencies., Jam protection and hoods), quality and design. In this article you will see what accessories recommended for iPhone and iPad.
Even though many times price represents a criterion for selection of accessories which we want to buy For our devices, however, we must consider other aspects. Before you will buy an accessory For iPhone, iPad or iPod, we need to be careful at compatibilitate, performance and efficiency.
Table of Contents
This cable or accessory is not certified and may not work reliably with this IPhone
For example, in case of a data cable / of loading lightning The price can vary from 10 - 15 lei to 80 - 100 lei for one original Apple. However, the difference between cheapest and most expensive It is not just the amount of money we get out of pocket. I heard many owners of Apple devices, who when they had to buy an accessory, they chose the most Ifetin, saying: “And this cheaper does the same thing ... with the most expensive". To a very small extent they are right, but if you do not use a charging cable original Apple or MFI, it is very possible that the device may suffer problems loading incorrect battery, degradation of performance in time or even more serious problems. About this issue of incompatibility I spoke in the article "This cable or accessory is not certified and may not work reliably with this IPhone", In which we explain why we need certified accessories" made for iPhone "or" Made for iPad "to connect to the device. It is recommended to use only recommended accessories for iPhone and iPad.
Problems can also occur at the transfer of data between iPhone / iPad and laptop or PC. There are high chances that a data cable u non-deserted will make it difficult for the transfer of data between the laptop and iPhone or even the connected device is not recognized.
Recommended accessories for iPhone and iPad
The label ”Made For iPhone“, “Made For iPad"Or"Made For iPod"It is present on all accessories electronics What are the certified by Apple. This is the guarantee as the maker of that of accessory standards of functionality and quality of Apple, and the risks that the devices will suffer from use with these accessories are minimal.
The "Made For" certification tag is also valid for castile (headset) dedicate iPhone, iPad or iPod. In the case of an Apple Uncertified Product, we can have problems with the sound from the headset, with the microphone or with premature wear of the cable. It can be used after only a few days of operation, or worse, one Jack not certified as tomay wear out the pins at the port of entry from Apple's device. Therefore, recommended accessories for iPhone and iPad are the MFI.
As an aside related to rotatable ear cup for iPhone compatibility, you need to know that it is not recommended to use the original iPhone 7 headphones / iPhone 7 Plus on a iPhone 6S or older model. With the launch of iPhone 7, Apple has given up traditional 3.5 mm jack jack, this being replaced with Lightning. Thus, in the iPhone 7 or newer models, the headset connects in the same port with the database / power cable.
If you have an older iPhone 6S or model (model with lighting port), you will find that in the iPhone 7 headest with Lightning jack you can listen to music. During a call, however, the sound quality of the headset's microphone capturedLightning connected to an iPhone 6s is very weak. So your interlocutor will have problems in understanding what you say. Especially if there is a lot of noise in the external environment.
So, even if we have to deal with two original Apple products, it is not recommended to use them unless they were created for our device model.
Serious trouble improper loading or overheating of the iPhone may occur if hoods with external battery, Uncertified Apple. Most often when you do not use recommended accessories for iPhone and iPad. These battery covers are useful for taking over the iPhone use duration and helps us a lot when we do not have a device loading, offering at the same time shock protection. Before buying this accessory we must be very careful who produced it, what parameters it has, if it is created for our iPhone model and especially if it is an Apple certified accessory.
Houses, foil and iphone protective windows and iPad
Seat covers, films and protective glazing for iPhone and iPad They are very important. And here it is advisable to use such recommended accessories for iPhone and iPad. They are designed to provide protection at scratches which can appear in the bag, in the pocket or when we get rid of the device on the floor.
Although thousands of iPhone covers are found on the market, not all offer the protection we need. Moreover, I saw many cases where the case that had to protect, scratched the screen or edges of the phone.
Before you buy a case, it is very advisable to study its quality well and consider a few aspects:
The material and thickness of the material from which the case is made
It is not advisable to use a case from a hard material inside. Both the cover and the strands of dust or sand that can penetrate between the cover and the iPhone, can cause aesthetic scratches. Recommended original leather seat covers / synthetic leather or from silicone. I have seen on the market a lot of bags that although it writes that they are silicone, the material used is just one flexible plastic low quality.
The covers made of thin materials can be more pleasant to design, but if we escape an iPhone on the tiles or on a hard surface, such a case will not protect almost at all. The case must flexible enough and thick, so that a shock can cushion.
Protected area of protective cover
Out of the desire of some to make the fact that they possess an iPhone, buy covers cut round around the logoto the back. Of the apple (Apple).
It is a very risky cover model, which I would never use. With the passage of time, the exposed part will be used, and when we take the case down we will notice quality differences between the cut part and the part that was covered by the case. These differences can consist of fine scratches and traces of wear, which decrease much of the general appearance.
Also at the surfaces covered by the case, we must consider the lower part. There are manufacturers of covers that ignore the fact that at the bottom of an iPhone there are two speakers and a microphone. Either they are incorrectly covered by the case, or are blocked with all kinds of "caps" for dust. We recommend the covers with "caps" only if you work in an environment with a lot of dust / sand or other particles that can enter these holes. The original Apple covers are not provided with protection at the bottom, the protection being limited only to the corners. Recommended accessories for iPhone and iPad are also considered protective covers.
Regarding the corners of an iPhone case, they must be tougher than the rest of the side surface. If we get rid of the phone in hand, the corners are the most exposed. In most cases these are the first to reach the contact surface. Besides the deformation of the carcass at the corners, from there they start and most broken / cracked screens.
Great attention to flip holders! These are recommended only with protective foil. There are many models of flip covers that over time produce scratches on the front of the iPhone.
The appearance of the protective cover
It is ideal to find the best balance between the design, the appearance of the protective case and its efficiency.
Plastic films or protective glazing They are very important for protecting the display of an iPhone.
Although thousands of models are found on the market, only a few assures protection and optimal design, which we need. Plastic sheets are recommended only if we want to protect iPhone from the fine scratches in the bag or pocket. If we want to protect it from shocks, we ideally use protective windows that cover the entire front surface.
Before we buy a foil or protective window, we must consider the material from which it is made,the surface covered, Snip around your front room and of thesensors, the space left not covered at the edges.
Kindly recommend Cellara 3D – o foil shielding glass, available for both older iPhone and new models.
We successfully test it on the iPhone 6s and iPhone 7 for almost a year. Very good coverage Both the screen and the outer parts on the front surface, There is scratching and no traces of wear not after a year after application, excellent protection from shocks (iPhone 6s escaped face down on the cubic stone. The foil was completely destroyed, but it remained glued and protected 100% display), easy application, look very nice, does not change touch sensitivity.
So, before you buy an accessory for iPhone, iPad or iPod touch, besides the price and design, it is good to consider the functional aspects and to buy only recommended accessories for iPhone and iPad.
A topic wide and very interesting. I had no idea that they were dedicated products for iPhone and iPad.
I tried to use the best by orienting me after the price. I have often cheated.
Congratulations!